Zenith Tank

The Innokin Zenith atomizer is a collaboration between Phil Busardo, Dimitris Agrafiotis, and Innokin. The goal was to create an easy and intuitive to use mouth to lung (MTL) replaceable coil-head atomizer.

Categories: ,
General Details
Why Innokin?
Phil Busardo and Dimitris Agrafiotis selected Innokin to work due to their continued focus on the smoker, and safety.
Innokin has helped millions of people transition away from traditional combustible tobacco cigarettes which is exactly in line with our goal.
Innokin was the correct fit for us and was instrumental in bringing our ideas to reality.

The Innokin Zenith Tank:
The Innokin Zenith atomizer is a collaboration between Phil Busardo, Dimitris Agrafiotis, and Innokin. The goal was to create an easy and intuitive to use mouth to lung (MTL) replaceable coil-head atomizer.
The Innokin Zenith will be available in both 4ml and 2ml TPD compliant versions.
The Innokin Zenith features an easy top fill twist design that will automatically shut off the liquid flow when filling in order to prevent flooding and gurgling, an adjustable airflow, and an easy and clean method to replace the coil.
The tank comes with two different coils to tailor your vaping experience.
– One 1.6 Ohm Kanthal coil for a cooler vape at lower wattages.
– One .8 Ohm Kanthal coil for a slightly warmer vape and slightly higher wattages.
There is also a QR code on the box that will direct you to tutorial videos that will help you in filling, cleaning, replacing the coil, and working with the tank in general.
The tank is designed for the beginning and experienced vapor alike looking for a quality MTL experience in an affordable package.
We truly hope you enjoy the Innokin Zenith atomizer!

1x Innokin Zenith
1x Spare 0.8Ω KAL Coil
1x Spare Drip Tip
4x Replacement Mouthpiece O-Rings
1x Quick Start Guide



Tutorial video

Zenith – Part 1 – Intro & Contents
In this video Phil Busardo introduces the Zenith and goes over the contents of the kit.

Zenith – Part 2 – Operation
In this video Phil Busardo goes over basic operation of the Zenith atomizer including:
– Setting up for initial use.
– Filling.
– Working with the airflow controller.
– Replacing the coil.
– Cleaning.

Zenith – Part 3 – Troubleshooting
In this video Phil Busardo goes over basic troubleshooting with the Zenith including:
– Flooding
– Dry hits

  1. Suggested VG/PG for use with these coils?
    Aie flow adjustments with holes or slots?
    What type of glass is it?
    When will it be availible?

    I want one for my MPV4.

    • They have been said to wick max vg very well! I personally prefer 70vg 30pg usually or 50/50. as it provides the nice throat hit people tend to favor for MTL vaping. The glass as far as i know is not replaceable, but the tank design features parallel coverage over much of the glass that have taken some pretty impressive drops with no problem frm my experience . I have one in red . It is absolutely amazing. Best MTL tank on the market, IMO

  2. Will you make a RTA deck, and why not include them with the tank?

    • Hi Wanda,

      If you’re looking for a mouth to lung RTA experience, please have a look at our Ares RTA. The Zenith was designed to be an easy MTL solution for vapers who don’t like or have the time to build their own coils. Thank you!

    • Why ask why ones not provided before knowing if they are even going to make one. I’d imagine that they won’t based on this tank not being about that and the aries already being on the market

  3. Hi Frank,
    Can I please ask if these coils can handle 65% VG liquid easily?
    Or is it better sticking to 50%?
    Thank you in advance.
    Best Regards.

  4. hi what device do you recommend for rich smoke

  5. what tank and coil are give me a lot of smoke in the same time compatible with my vtr

    • Hi Ahmad,

      The VTR requires the 510 adapter to use anything modern, and due to it’s low wattage output, it will be hard to find an atomizer that creates a lot of vapor with it. The Zenith is probably your best bet, at max wattage with fully open airflow.

  6. are the tanks sold including the coil ?

  7. Will the Zenith MTL tank be a good fit on the Innokin MVP4 mod? My current setup is the MVP3 Pro with the Aspire Triton 2 tank, 1.8ohm coils, firing at 13watts. I use a high nicotine juice and do not like the warmer vapes. I’m due to update my device and was looking at the Zenith tank with the MVP4 mod, hoping this will perform similar to what I currently have. Would the Zenith tank fit flush on MVP4, or will there be a gap? Thanks in advance!

    • Hi Mike,

      The Zenith and MVP4 would be a fine combo. I just screwed a few Zeniths onto my MVP4 and none have gaps. If you use 13watts primarily you will get a ton of battery life out of the MVP4. Thank you!

  8. Hi,
    I find my EZ Watt to be a bit of a tight draw but I want a MTL rather than DTL. Would this tank be compatible and a bit of an easier draw?

    Thank you

  9. When will the Zenith kit be coming out?

  10. Hello, can you suggest a fix for a leaking T-20 S? Brand new and leaks from air intake holes…a lot. Disassembled, reassembled, tried a new coil, made sure device is screwed together properly and coil seated properly. Still leaks after sitting for about 30 mins. Using 50/50 juice.

  11. Hi how is the performance of the 0.8 coils heads compared to the 0.8 of t20s? And price difference of the coils thanks

  12. What mod would be best for the zenith
    Using high nic (18mg) ?

  13. Just recently purchase the Zenith tank. The two times that I have filled the tank it has leaked through the air holes both times shortly after. I made sure everything was tight and the gasket on the coil was in place. Any help would be really appreciated. Thanks!

    • Hi James,

      Make sure you do not overprime your coil as this can cause leakage. When filling your Zenith, close your airflow off. After sitting for a few minutes, reopen your airflow and vape. There should not be any leaks. If it still leaks, replace your coil, and repeat the process. Hope this helps.

  14. When will the 2ml Zenith tank be available in the US? Thanks.

  15. I’ve been a Nautilus Aspire user for years now. I finally rolled the dice and grabbed this Zenith tank. It’s like night and day with the quality and vaping experience with this tank. My only slight beef is the tank is smaller than I’m used to, however they made it extremely easy to fill so it’s a non-issue for me. I have it paired with a E-Vic Primo battery mod running at 9.5 watts. If you’re on the fence like I was jump on this tank! You won’t be disappointed!

    • Hey Jeff,

      Excellent news! I too used the Nautilus and Nautilus mini a few years back. The Zenith is quite the step up :) Happy to hear you’re loving it and thanks for your support.

  16. Hi,
    Just got a Coolfire Ultra… would the Zenith be suitable to use on the Ultra? Is it better than the Scion tank that came in the kit, in terms of flavor and vape production on the Ultra?

    • Hello Zai,

      The Zenith is suitable for use on the Ultra, absolutely. It’s a primarily low wattage atomizer that is focused on flavor rather than vapor production. The draw is much tighter than the Scion. They are two polar opposite tanks. If you are unsatisfied with the flavor of the Scion, the Zenith might be more up your alley.

  17. Hi! Can I use this in an Innokin Kroma itaste?

    • Hey Angel,

      Absolutely, provided you use the included 510 tank adapter with the Kroma. The Kroma-A is compatible with the Zenith right out of the box without the use of an adapter. Cheers and happy vaping!

  18. So I purchased this tank, tried it and I must say it could be better. I have used both coils and tried to adjust the air restriction and it seems impossible to dial it in perfectly. It’s always to tight or to loose. The holes for the air flow seem to be all the same size and the adjustment ring seems to have a inner bevel that gives you the impression that the hole is more closed than it actually is. This tank could have been the best it has good flavor, size and design but as a mtl tank it leaves alot to be desired. I seen a lot of reviews for this model typically people are fine with it so maybe it just mine that’s got issues.

    • Hi Joe,

      We very much appreciate the feedback and comments you’ve made. It can hard to find an “in-between” with airflow. Personally, I have found with 2 airflow holes open to be a good medium between tight and loose. What juice ratio are you using? You might have a better experience with 30PG/70VG juice or higher VG concentration.

  19. Is it any tighter of a draw than the Prism T20-S? I’m enjoying the EZ Watt, but haven’t quite found my sweet spot to totally give up smoking. Love the prism, but having something I could adjust both tighter & looser might do the trick.

    • Hi Julie,

      In my experience with the T20-S and Zenith, the T20-S is similar to the Zenith when almost full opened. The Zenith can get quite a bit tighter than the T20-S, and ever so slightly more airy. Hope this helps :)

  20. Hi all
    I know this might sound a silly question. But here goes, do the isub coils fit this Zenith tank?
    I use various isub tanks and use the 2.0ohm coil.
    Thanks in advance.

  21. Is the Zenith tank a good fit for the ezwatt? Im not to vaping and LOVE my ezwatt. Just need a bigger tank, and will it drain the battery life quicker…. 1 week cigarette free today, rhanks to the ezwatt.

    • Hi Amanda,

      The EZ.WATT can be a great fit for the Zenith. Battery life is entirely dependent on how often you vape and what wattage setting you use. The Zenith works best under 20 watts so you should get good battery life overall. Congratulations on your first week of being cigarette free!

  22. Is this tank compatible with the MVP4 by INNOKIN

    • Hi Tynecica,

      Yes, the Zenith is fully compatible with the Power (Wattage Mode) setting of the MVP4. The MVP4 is compatible with any 510 threaded atomizer capable of utilizing 100 Watts of power or under. Thank you for your interest!

  23. Love the tank! But for the next version please make it with a larger capacity. Thanks!

  24. I just got a innokin T22 and I find it too tight of a draw and I feel the coils don’t last very long, 80/20 Beard No. 00, i prime and pull clean. Is the Zenith tank compatible with the T22 seeing the T22 is 14w regulated. I would like the airflow adjustability of the zenith tank plus not having to drain the tank to swap coils would be nice. Also does the Zenith share coils with any other mod, meaning are they easily obtainable or are they a Zenith only coil?

    • Hi Keith,

      Yes, the Zenith is compatible with the T22 however you will have no wattage customization. The Zenith does not share coils with other tanks but the tank is quite popular and it should be easy for you to find spare coils at authorized Innokin dealers. Thanks Keith.

  25. Brilliant ! Close to perfection.
    At last a descent mtl atomizer with the last features !
    I think the vast majority of vapers in Europe (I live in France) use mtl and didn’t quit nicotin (and don’t want to).
    But most of the ads and pictures and devices developpement try to sell us sub-ohm, cloud chasing and so on.
    Big mistake from my point of view. Keep up the good work Innokin and you shall be rewarded by your sellings.

    Could you please, Mr Innokin, built us some nice SS316 (0.8 & 1.6 ohm) coils to use this fantastic Zenith with TC ?

    • Hi Yaz,

      Appreciate the kind words! MTL tanks are definitely underrated and not as common as all the sub ohm options out there. Innokin has always focused on accessibility to smokers and MTL excels in that regard. Glad that you like your Zenith :)

      No word on more coil choices- but it’s certainly possible!

  26. Hello, I would like to know if there will be a 22mm version of this tank? The current version of the tank is to big in diameter for my devices.

  27. Is the 2ml version also 24mm? Thanks.

  28. Is this tank compatible with the Innokin SmartBox?

  29. Hi, I have the Innokin Zenith and love it, however I have noticed I am getting liquid up in the drip tip and in my mouth. Does this mean the tank is “flooded”. What do I need to do to stop this? Thanks

  30. Hey!
    I have an Innokin SVD 2.0 and was wondering if the Zenith Tank would work well with it and if the Zenith Tank sits (relatively) flush with the SVD 2.0

    • Hi Shawn,

      While I do not have an SVD 2.0 on hand, 20 watts should be plenty for the Zenith and the tank should sit flush on the SVD 2.0, although there may be a bit of overhang. Hope this helps!

  31. Hello
    The zenith is a great tank. Thanks. I wanted to know if I was to use e-juice at 75VG /25PG would it work? Would both the coils be fine the .08 and the 1.6 ohms?

  32. unless you’re a longtime & dedicated DIY’er with a Kayfun who enjoys building and wicking your own coils, it’s getting harder & harder for MTL vapers to find convenient options for tanks and atomizers in a market that has become, IMO, increasingly dumbed down and geared toward wide-mouthpieced, cloud-chasing, high-wattage vaping of synthetic e-liquids, the content and quality of which are unknown and not disclosed.

    i vape only high-quality tobacco & cigar extract juices (real-tobacco-extract.com) at 70PG/30VG and have largely been disappointed in terms of pre-built coil/atomizer options. Along with my Kayfuns, I have an Aspire 2 that uses the Nautilus BVC coil, and though the quality of the vape & flavor conveyance is excellent with that rig, I wouldn’t say it’s the most convenient or cleanest rig to work with, especially for a juice hound like me.

    The Zenith was recommended to me by a fellow MTL guy at VaporDNA, and I have to say I’m overall pleased with it. For me the sweet spot for MTL vaping is at around 1.0ohms of resistance, and definitely under 20 watts. As far as the Zenith, the higher-resistance (1.8) coil offered doesn’t work for me as well as the 0.8 coil, so that’s what I use. I generally vape at the low end of the recommended wattage setting.

    My main concern was the construction of the tank, which does not allow disassembly for cleaning. I like to keep my stuff clean so I use wet wipes (not antibacterial wipes, just wet wipes), the moisture from which dries off quickly. So having to run water through the tank in order to clean is a bit of overkill IMO, but I understand the reason for it in terms of the overall design aims.

    Thank you for offering this product. I use it on an Innokin Platform Series mod, but it also works well on other mods. I appreciate the larger tank capacity than the Aspire 2, so that’s a plus. I generally keep a couple of tanks going at once; an everyday vape and an occasional fruit or nut or cigar extract vape, which means I’ll be buying Zenith tanks & replacement coils, and probably even another mod or two, as long as you continue to market them.

  33. Brand new zenith tank with the Kroma-A is leaking and spitting like crazy.

  34. When will full details on the new Plexus Z coil be released? Looking forward to it.

  35. Purchased 2 Zenith tanks and they’re both leaking and flooding.

    Using 70VG/30PG liquid and the preinstalled 1.6 coils.

    Followed instructions to the letter and checked that everything was seated correctly and tight.

    Filled them (didn’t overfill) both last night and they vaped fine.

    Woke up this morning to find liquid leaking out of airflow slots and the “chimney” flooded.

    Filling slot was closed fully, bottom was tight and coil was seated properly. Airflow was set on 2 holes.

    I have other tanks (Vaporesso Veco, Vaporesso NRG, Aspire Nautilus 2, Smoke Baby Beast) and have never experienced leaking.

    Am I unlucky enough to receive 2 faulty tanks??

    • Hi Paul,

      Try completely closing the airflow control ring when filling your tank. I’d suggest emptying out your tanks, re-seating the coils, and refilling with the airflow completely closed off. This should allow for a proper vacuum seal and should stop the leak.

      If you still have issues, follow up with our support email at support@innokin.com for replacements.

      • Thanks Frank. I’ve tried your suggestions and it seems to have helped somewhat.

        If the tank is left for any longer than 12 hours though it starts to flood again.

        I”m thinking it might be a problem with the internal o-ring that the coil is inserted through (not the o-ring ON the coil). Are replacement internal o-rings available?

  36. Hi,

    Love this tank to bits. Love the top fill, coil changing while tank is full and the airflow options.

    The curved replacement drip tip is what I now use all the time. Are you able to buy replacements of this drip tip somewhere?

    Thanks :)

  37. Loving this tank for MTL. Best yet!

    I understand you are producing a ‘Plexus Z’ coil for this. I’ve been trying to find them in the UK without success. Could you tell me where I can get them or when they will be available here?

    Many thanks


    • Hey Pete,

      The Plexus Z coils will be available very soon at your nearest Innokin dealer! They will also be carried online. It’s still a recent release, so it will take a little while for stock to hit stores. We will also likely carry them on http://www.innokinstore.com, but for now we only ship to addresses in the United States. Hope this helps.

  38. In short? Best MTL tank I have tried. Traded smoking for vaping a few years ago. Up till recently, I have been moderately dissatisfied with the tanks I have used. For the last couple of years until the Zenith I was using an Emow Mega that was OK. Good a lot of the time, sometimes not, occasional flooding, leaking. But all the tanks I have used were also like that.

    For the last week, I have been using the Zenith. Vaping has finally arrived the way I wanted it. Big tank, solid tough construction, super clean top loading. No leaks, no flooding and a consistent, full, satisfying vape. Thanks guys!

    I run a 1.6 coil with 50/50 18mg nicotine @ 12 watts.

    My only niggle is the cheap plastic tips on an otherwise high quality unit – but they are easily replaced, they appear to be exactly the same size as my Mega.

    Had one good drop… just trashed the plastic tip. Hope the glass is strong, but looks well sheilded.

    Cheers from one happy vaper!

    • Hey Mike,

      Thanks for the kind words and support! We’re really happy to hear that the Zenith has delivered the vaping experience you’ve been looking for all these years! The cheap plastic tips you refer to are in fact made of Delrin, which is a very heat resistant thermoplastic and one of the most preferred drip tip materials on the market. A metallic drip tip could heat up and cause burns or discomfort to the lips.

  39. Hi,

    I recently bought the innokin zenith atomizer and it’s great. A couple questions.

    I have been vaping in temp control mode on settings 25w and 150c using the 0.8 coil. When I use the 1.6 coil this same setting produces a bad flavour, a little rough, maybe burned taste. It only produces a good result when in wattage mode using that coil, at 14watts.Why is this?

    Also, when I put the the Watts up to 75w in wattage mode, smoke poured out the atomizer and damn near blew my head off. Why is this setting enabled if it produces such bad results?


    • Hi Martin,

      25w is too much heat for the 1.6ohm coil which is why it tastes burnt. You need to lower your wattage and temperature settings for the 1.6ohm coil compared to the .8ohm coil.

      The mod you are using is variable wattage, which enables it to be used with multiple different tanks. The Zenith should not go much higher than 20w. 75w is for other atomizers that require more power, unlike the Zenith. Please be careful to only use your tanks within the recommended wattage ranges.

  40. Do we know watt for new Plexus coil?
    I don’t find any specs..


  41. best tank ever!!!!
    Coils with long life , good capacity(4ml) very good steam
    please i have a question .
    A 22mm have 3 ml capacity ?

    • Greetings George,

      Thank you so much for the kind words and recommendation!

      As for your inquiry, the Zenith is offered in a standard 24mm 4mL configuration, or the TPD complaint version at 2mL. Hope this helps! Let me know if you have any more questions.

  42. Zenith dimensions isolate it from fitting most mods…….sbs……recessed……single cell etc….are their plans for a mini……or something with a smaller diameter to make it useful for a large selection of mods…

  43. Is there other (other than the size) differences between 24mm and 22mm versions? And are the coils compatible?

  44. is the t22e batery compatible with this tank?

  45. Hi, just purchased the kroma with the plexus coil. I’m not satisfied with the low wattage I have to use, can someone recommend a coil that will fit the zenith tank that will allow me to vape at 40watts. Sorry but I’m a bit new to all this. Many thanks Tara

    • Hi Tara,

      For higher wattage vaping, I’d suggest trying out the Innokin Scion II or Plex tank. They will need almost the full 75w of power from your Kroma, but will be more satisfying if the Zenith doesn’t fit the bill.

      For 40w specifically, try the Axiom or Crios tank.

  46. Hello. Why there’s no white version for this atomizer ? There are all available colors but not white, like the one for the kit Kroma-A Zenith.

  47. Does the Zenith tank work on the Innokin Proton?

  48. Is the Zenith compatible with the new Plexus Coils? Thanks in advance :)

  49. Alright, Thank you :)

  50. Hi, I ordered the Kroma-A w Zenith tank a few days ago (Austria, EU). Of course, I’m interested in the Plexus coils… But on YouTube I heard that they are not supposed to be used with salt nicotine. Is that correct? I use salt nic because the freebase is to harsh for me. I vape 6 mg/ml even with salt nic (7-9 mg maximum). Is it possible to vape a 6-7 mg/ml salt nicotine liquid with the Zenith Plexus coils (as well as the 0.8 and 1.6 Ohms Kanthal coils)?

    • Hi Ruana,

      No, salts work great with the Plexus coils and you are encouraged to use salts with the Zenith and Plexus. You should have no issue using salts in any configuration with the Zenith Plexus-Z coils.

  51. Hello,
    I just bought the tank and after I unpacked it it turns out it is broken. Above airflow control ring thre is unattached metal thing which I don’t see in the videos. Any idea how I can fix it?

    • Hi Denislav,

      If it is broken out of the box, my suggestion would be to have it replaced. Return it to the vendor you purchased it from for a warranty repair or replacement, or contact us directly at support@innokin.com to open a warranty request. Apologies for the trouble!

  52. Hi Frank,

    Does the Zenith 24 mm Standard edition share the same coils with the Zenith D22 Standard edition ?


  53. The Zenith is the BEST MTL TANK EVER! I have two now; one with nicotine and one without– for those times I feel like chain vaping. Question: the 0.8 coils stay in normal range for age and heat, but the week-old 1.6 ohm coil I’m vaping on right now reads 1.88 cold and 1.94 when hot. (tried it on 2 other mods and get same reading) I always keep the wattage at or below recommended. Since the ohms have risen, I’ve lowered watts from 11 to 8.5 and it’s still a good vape. Not super knowledgeable, so just want to make sure there’s no danger in using a coil that’s day-to-day rising in ohms.

    • Hey Kat,

      Ohm creep is primarily due to a loose connection in the coil, or the coil material touching the inside of the coil structure. I’d recommend replacing the coil to get a more reliable hit each time.

      There’s no danger, just a chance that the coil will short out and leave you without a working vape until the coil is replaced.

  54. The only thing turning me off about this tank is the thin mesh over the top of the coil. I’m pretty conscientious about breathing in particulate matter, because in 20 years, pulling little bits of metal that build in our lungs is not going to be easy.
    My question is, is that mesh part of the heating element itself, or is that a covering to keep the cotton in place?

  55. Hi I’ve got the coolfire mini with a slipstream tank, will this zenith be compatible or am I unable to swap

  56. hi, is there a white tank available without the mod

    • Hey Michael,

      Yes, you can purchase the Zenith in white separately. Check any of our authorized resellers or buy directly from us at http://www.innokinstore.com. Thanks for your interest!

      • i`m in the uk cant buy directly unfortunately but i am thinking of getting the 4ml tank from over seas what would be the best bet for price as shipping can be quite expensive and customs not seizing it and charging more money to get it, also are the coils for the 2ml same as 4ml so a can get them here in uk

  57. Hi Folks, I am new to vaping. My first kit is the Innokin T20s. I like this device, but I’d like a stronger flavor and hit. I wanted to know if changing the default 0.8 ohm prism s coil to a 1.5 ohm prism s coil would help. Or should I go for another tank like the Zenith. If i change the tank, are they compatible with the T20s vape pen?

    • Hi Deepu,

      You may get better flavor out of the 1.5ohm coil, but the Zenith would definitely be an upgrade overall. I’d recommend getting a Kroma-A kit to compliment the Zenith as the T20-S is designed specifically for use with the T20-S atomizer. Hope this helps.

  58. I have bought the Zenith tank; it work Perfect and the look is very good; there is only one problem: the name ZENITH (laterale on rotation refill Cap), the Window glass and the air hole linee are not alligned (when the refill Cap is in closed position and the all air holes are open). I Said that becaus all “Innokin zenith tank” immagines are rapresented in thi way. Can I solve this problem? Thanks a lot.

    • Hi Leonardo,

      I believe you’re saying the laser engraving on your tank is off center. Unfortunately, we do not cover cosmetic defects under our warranty, as they do not affect the quality of the vape, and many users get scratches or scuffs on their equipment anyway. Sorry for the trouble.

  59. Hi there,

    I have the Vaporesso Swag Kit and I am looking for a MTL device. I was suggested to purchase the Innokin Zenith MTL Tank to use on my Swag mod. Would the two be compatible?

    • Hi Julian,

      The Swag kit seems to be 510 threaded, which means it should be fully compatible with the Zenith tank. Please note the Zenith coils are kanthal which should only be used in wattage, or power mode. Thanks for your support and hope you enjoy your Zenith!

  60. Hi,

    where should i fill my tank up to? i have been getting lots of leaks and have been advised not to overfill the tank, but i cant find any reference as to where the fill line is.

  61. Hi, I am having real leakage problems with the zenith tank, I’m using the cool fire ultra mod and I’ve tried 2 separate tanks and 4 coils but I constantly get leakage from the air flow holes at the bottom. I have found that if I remove the tank from the mod between vapes the leakage practically stops.
    If my mod has a bad thread or the contact plate is too high could this cause the leakage I’m getting?

    • Hi Rik,

      It’s odd that you’re only getting leaks while the tank is screwed on. This would lead me to believe that there is either a pressure issue or tolerance issue with your threads on either the mod or tanks.

      Have you tried different juices? Thicker e-liquids tend to leak less. Drastic temperature changes can also cause leaks in your tanks which is a common complaint during the winter months.

      Make sure all o-rings are in placed and undamaged in your tank!

  62. Really nice product, I’m happy with it. In the summer I used it with an 50-50 liquid, and it performs well. But when the temperature began to decrease, the coil produced burning taste, whatever I did (waste 4 coils). This happens with my Endura T20S too, so I realized, that the liquid must be the problem. So I tried an other liquid brand with 60-40 ratio (more PG than VG) and the burning taste is gone. So my advice is to use higher PG ratio liqiud with this tank.

    • Hey Alex,

      Thanks for sharing your experiences and advice on the Zenith and T20s! Glad to hear you’ve gotten better results with higher PG eliquid. I’ll keep this in mind and pass it along to the team and see what they say. We might do some testing ourselves :) Thanks again and have a good one!

  63. Really great tank, if you’re using a 50-50 liquid.

    But I found that when using shake-and-vape liquids, which can be diluted down to 70-30 or even 60-40 (VG-PG), the liquid holes on the coils seem to be too small.
    Without doing strong draws in between without firing, I’m getting a burnt taste after 3 or 4 draws. – No chain vaping of course.

    I’m always prepping the coils from the top and the side holes, but after a while I’m getting liquid-flow issues again. Is there anything else I can try? – I’m using 11W on the 1.6 ohm coil with 2 open air holes.

    Thanks for your help!

    • Hi Markus,

      Thanks for sharing your experience and feedback. I would suggest potentially using a toothpick or needle to poke a small hole in the cotton juice parts on your coil. This can help keep up with wicking if the cotton in your coil is packed a bit too tightly. Be careful not to make the hole too deep or big as that can cause the coil to flood. Start with a small alteration and continue until you’re more satisfied with the performance difference. Thanks and have a great day!

  64. Hi, Can I use it with Innokin Proton?

  65. Hey Guys,

    Just wanted to drop you a very big thank you.
    After a month trying out vaping with my g/f’s vaporizer, i decided to buy my own and ended up pairing a Innokin zenith to a Vaporesso mod. vaping with the 1.6 coil on 14 watts with airflow fully open and I am loving it. Haven’t tried the 0.8 coil yet, but will do so shortly.
    Are the any coils available for the zenith to be vaping on a higher wattage?

    Kind regards from the Netherlands,

    • Hi Michiel,

      Great to hear you have been enjoying your start of your vaping journey! The Zenith has a Plexus coil, which is lower ohm and operates at a slightly higher wattage than the typical 1.6ohm coil. Check it out if you can!

      Thank you again for your support and happy vaping!

  66. Hi,

    I have purchased a Kroma-A Zenith kit. I was looking forward to the temperature control feature, but just learned that this is not supported by the Zenith tank. It was not clearly stated on the Kroma-A Zenith advertisement (which does mention temperature control). I intend to vape CBD, which requires 230 Celsius (446 Farenheit). Using the Zenith tank, and respecting the Wattage for the coils that come with it, do you know at what temperature it will be operating?

    Thanks in advance.

    • Hi Victor,

      The temperature will ramp up quickly from the start of your vape until you let go of the button. I am unsure of the exact temperature as it depends on your coil setting, ambient temperature, and how long you vape for.

      Apologies for the inconvenience- but it should not be a worry unless your individual vapes are very long.

  67. Innokin Zenith Tank -question- Can i use this on other mods like example: VTX 200w?

    • Hi Tormod,

      The Zenith is a 510 threaded atomizer, meaning it will typically work with any other mod on the market, provided they can power up to 20-25w of power and use a 510 connection. It should work fine with your device. Hope this helps!

  68. Just wondering if the 0.5ohm coil is suitable for use with 50mg nicotine salts?

    • Hi Stephen,

      50mg nic salts would be quite harsh on any coil in my opinion. The Plexus coil is slightly more wattage and vapor density than the typical Zenith coil. I’d recommend stepping the nic level down a bit.

  69. Hi,
    I have a question. I got the Zenith. It is OK for W setting with 0.8 and 1.6 coil, but what about the V setting? I can not find an explanation.
    Thank you

    • Hi Marco,

      “V” stands for Voltage, which is a setting that has been mostly entirely phased out for the more easily understood Wattage setting. On the .8ohm coil, you’ll generally need higher voltage (try around 4V) and on the 1.6ohm coil, start off lower, try around 3.4V. What mod are you using?

  70. Thank you Frank for your kind answer. I’m using 1.6ohm coil with 11.5 W setting. I’ve used 5 V setting but now I’ll set V to 3.4 as you suggest.
    Thank you and have a great 2019!

  71. I’m using Zenith Innokin Cool Fire mini.

  72. george.chapman1986@gmail.com January 7, 2019 at 8:05 pm Reply

    Hi guys

    I am in the midst of starting up my very own little vape shop in Kent and wanted to reach out to you to ask you for some advice as it looks like you have a pretty successful vape business going.

    Firstly, I would like to know how to select the best e-liquid wholesaler with a very good e-liquid range. Do let me know if you sell wholesale and if so, it would be great if you could send me across your price list.

    I am planning of making my own e-liquid brand and was wondering what is the best way to promote it? I have already purchased an email list of all vape shops and companies as a whole for my newsletter marketing from https://theeliquidboutique.co.uk/products/vape-company-e-mail-mailing-list

    I am also getting a vape SEO company to help me with the website creation.

    What else would you recommend I do to make my vape shop a success?

    I really appreciate your time and look forward to hearing from you.

    Kind regards


  73. Dear Frank, can you please tell me something about 0,5ohm coil? I use 1,6 and 0,8ohm coil (1,6 in particular). Is 0,5 significantly different about taste obtained from 0,8?
    Thank you


    PS I’m very happy to use Cool Fire Mini. I love it

    • Hey Marco,

      The Plexus coil offers significant improvements in coil lifespan as well as hit consistency. It is a bit hotter than the .8ohm coil and definitely hotter than the 1.6, so the flavor and cloud production can be a bit intense. However, it works very well with nic salts and the airflow opened up. Glad to hear you’ve been loving your Cool Fire Mini and thank you so much for your support! Happy vaping!

  74. Good morning, I just bought a Zenith atomizer and I mounted it on a Wismec P80 Sinous battery box. I can’t set the Wismec with the Zenith . I continue to burn coils (0.8ohm – 1.8ohm) using the watts suggested by Innokin. When I vapor comes on a burnt taste that annoys even in the throat . I am using a 50/50 liquid flavoured with biscuit. What am I doing wrong? Will it be in the way of vaping? I just changed from throat shooting to cheek shooting. Thanks Lobo

    • Hello Bruno,

      Thanks for buying an Innokin product! We greatly appreciate your business.

      In regards to your issue, it’s possible that your Wismec P80 is firing too hot for the settings. Try lowering the wattage 5w lower than our standard recommended settings to see if this helps prevent burnt hits. Make sure you open up your airflow after filling, as fully closed airflow can potentially burn the coil. If you’re still having issues, I’d recommend trying the Zenith on a different mod, with standard wattage settings (10-20w). Thank you again and have a great day.

  75. The Zenith is the best tank I have ever used.
    Unfortunately, I drop my mod/tank regularly, and the drip tips shatter.
    Why can’t you offer some OEM replacement drip tips for the Zenith?

  76. Hi there, i’m new to all these stuff but so far i like this tank. I’m wondering if i can vape with temperature control using a 0.5 ohm coil? Thanks!

    • Hi Davide,

      Welcome to the world of vaping, happy to have you as part of the Innokin family! Unfortunately, all Zenith coils are NOT compatible with temperature control settings, only direct power (wattage) modes. Hope this helps!

  77. I am using the Zenith D22 on a Wismec CB-60 (both black). Works very well together. Also tried it on my Kroma-A iSub-B mod & T20S tube. The Wismec reads resistance lower than actual, so had to lower wattage somewhat compared to Kroma-A. D22 worked better when able to fine tune watts. Would like to see a SS316L 0.8 ohm coil for Zenith. Currently using 1.6 ohm coil at 9.5 watts on CB-60 (or 10.5 – 11.0 watts on Kroma-A).

  78. Hi
    I have a question.
    Do these coils last longer than the Jem coils?
    I’m only asking because on the Jem I have to replace my coil every second day, which is less than 10ml of liquid. The liquid I use is 20mg nic salt 50/50. I run the Jem tank at 12 Watts. Before I used to run it at 13.5watts but the coil would taste burnt within a few hours. I am quite a heavy vaper and I use multiple devices and as yet I haven’t found a coil that lasts. Ps I always allow a good 30 mins wicking time on new coils.

  79. Was enquiring is the zenith tank painted or anodized thanks

  80. I’ve moved from T20 to Zenith Kroma. Using the Plexus z 0.5 coils I’m lucky if I get 1 to 2 days then I get burnt taste.
    I tired my first 1.6 ohm coil today and found similar.

    Tired different eliquids, I’m now on Vaporfi 80/20%- I tried this specifically as they only sell the plexus z coils on their website along with their eliquid.

    I prime carefully, drops on coil first, into tank and leave st least 30 minutes- even tried overnight.

    I’m waiting on 0.8 coils coming as suspect the 1.6 is a bit weak for the high vg liquid- but reading forums there”s so many people with similar issues with the Plexus z coil I’m wondering if there’s a faulty batch or it”s just not suitable for 80/20?

    Any ideas?



    • Hi Chris,

      80/20 is a stad steep for the Zenith, 70/30 will likely suit you better. However, it’s also likely that the ejuice you’re using now is high in artificial sweetener. Sweeteners cause burnt taste issues extremely quickly compared to regular ejuices. The sweetener burns and sticks to the wicking material, causing the burnt flavor.

      Try a slightly thinner, sweetener free e-juice. Hope this helps!

  81. I have 3 of the innokin zenith tanks, love them, great flavour. The only problem is i am going thru a coil a day. Tried the innokin ares because of the cost of coils with the zenith, however its a fantastic easily build but the flavour is just not there and remains very waxy in flavour. I just wish the coils for the zenith would last longer.

    • Hi Jax,

      Coil longevity depends on a lot of variables, but the one you can control the most is the type of juice you use. Juices high in sweetener and high in VG can quickly gunk up a coil and cause a burnt taste from the sweetener burning to the wick. Try using a sweetener free eliquid. It will extend coil life.

  82. Hi
    Kroma/Zenith combo. I bought an extra tank from you, just after 3 months of use the bottom airflow ring thread failed, although it’s just out of 3-month warranty, & impossible for me to prove that I didn’t over tighten or cross thread it my self, it happened. Through no fault of mine, the bottom airflow ring lost the ability to tighten up, which actually makes the whole tank fit sloppy. It is still usable, but I found that rather annoying that literally just past the 3-month warranty the engineering fails like that. the tank is still usable but I don’t like using it as the connection is loose & I worry about sparks from the contact point of the tank to mod.
    I do rate the Zenith highly, love the design but I’m still annoyed.

    • Hi Adz,

      Sorry to hear about the issue you’ve had with your threads. Extending warranty just outside of the 90 day period can be given as a courtesy for you if our support approves it. You should contact us at support@innokin.com, explain the issue, and see if they can send you out a replacement airflow ring.

  83. Hi

    Can i use zenith TPD coils on standard (D22- no TPD) zenith tank?


  84. Hello,
    Had the Zenith tank for few weeks now. First week was ok, then i start finding the tank not so friendly: whistle a lot and closing completely the airflow makes dragging impossible and producing no cloud at all. Also often happens that i taste the liquid in my mouth even if seems it doesn’t leak. I’m having a quite disappointing experience. There’s anything i can do to fix this?

    • Hi William,

      Many of the issues you describe can be alleviated with a replacement coil. Try replacing the coil, priming it lightly, and refilling the tank. If you’re still having issues, please get back to me for further help. Thank you!

  85. Tank setup is great. My only complaint is the coil life. Burn through a 5 pack of 1.6 coils in 3 weeks. Other than that the priming and breakin period is super fast. Great flavor as well.

    • Hey Dave,

      Thanks for the feedback! That coil life isn’t too out of the ordinary, it depends primarily on the sweetener percentage of the juices you use. You could have longer life out of sweetener-free juice.

  86. Can I use mesh Z-Plex3D 0.48ohm coils in Innokin Zenith 4ml? Thank you

  87. Hello,

    I recently purchased The Innokin Kroma-A Zenith Kit and it is constantly leaking while I’m vaping. I changed the coil and made sure that everything is closed proper, but still the same. I am also using 65VG E-Liquid, I read that they should be fine, but still the same. I have to constantly clean it, and there’s always a lot of liquid coming. Is there anything I can do to fix it?


    • Hi Johanna,

      By the sound of your description, you may have an issue involving the rubber o-rings or gaskets in your tank, or potentially a manufacturing tolerance issue with the tank. Our support can help troubleshoot this issue with you better. Please email us at support@innokin.com for further assistance. Thanks!

  88. I usually use 12mg nicotine with a 60 vg/ 40 pg with my current aspire tank and I want to switch to the zenith , is that okay with the 4ml zenith? Or do I need to move down to a 6mg nicotine when I switch to the zenith

    • Hi Alicia,

      That should work just fine. Try it yourself and see if it’s too harsh for you. If it winds up being harsh, try stepping the nic level down to 9mg or 6mg as you see fit. Ultimately, it depends on the preference of the user.

  89. Can I use a 12 mg nicotine with 60 vg/ 40 pg or do I need to move down to 6 mg nicotine

    • Hi Alicia,

      12mg 60VG should be just fine with the Zenith, assuming it’s not too harsh for you. If you find it too harsh, then I’d look into stepping the nic down to 9mg or 6mg. Try closing the airflow off to about half and take moderate drags instead of large ones.

      • Thank you so much for your reply to my question on the nicotine level. For years now I’ve been using the Aspire Nautilus 5ml tank and now their new 5ml tank and coils aren’t quite working out for me and I didn’t want to switch to sub ohm tank since it was harsh on my chest and throat when I’ve tried my mothers. So I’ve been searching for a good mouth to lung tank. From the reviews I’ve seen of your tank I think that your tank is going to work out perfectly for me.

  90. Hi Frank,

    Are there issues with the new .48 PLEX3D coils as i have gone through nearly 2 packs in 14 days. I switched from the .8 coil due to the claim they will last longer and have better taste but its not really working out like that for me. I am running them at 16w and seem to get dry hits after only a hit or two. Seems they are not wicking properly which leads to a very fast coil burnout rate. I could of just lost the coil lottery with these 2 packs but is it something that is being reported? Using a 50/50 blend at 12mg freebase so that should be a non-issue.

    • Hi Matt,

      No, we have not heard of issues like these before. It sounds like it could be a wick packing issue or a pressure issue in your tank. I’d recommend contacting our support directly about this issue, as they may be able to provide replacement coil packs to you or hopefully find a fix to the problem. Please contact them as soon as you can at support@innokin.com. Sorry for the trouble!

  91. where can I get new O-rings that’s on the bottom where you put the coils into?

  92. What size is the mouthpiece that comes with the zenith?
    Is it 510 or 810? or something else?
    Can I order replacement mouthpieces from innokin?
    I want to get a bunch of cheap ones because they fall out.

  93. Hi! I just got your Zenith tank and am not getting a connection to my mod, I’m using a Snowwolf 80W max model and I’ve primed properly but it is not registering the tank. Is it a fault with the coil, or is it just a connection issue with the mod? The mod obviously recognizes it somewhat since no “check atomizer” message is showing, and it’s showing about 0.2 ohms on the 1.6 ohm coil, just no voltage since there’s not a real(?) connection. I’ve tried adjusting the connection and still nothing even though my mod seems to be working with other atomizers. I’m hesitant to change the coil unless necessary since it’s new but if need be I can

    • Hi Alex,

      When a mod says “Check atomizer”, it generally means that there is NO connection between the mod and the tank. It’s possible that the coil is at fault, but also possible that the mod’s 510 pin is not making a proper connection with the Zenith. Unscrew the tank and clean the 510 connector of both the Zenith and mod. If it still says check atomizer, replace the coil. If it still has the same error after a coil swap, then it’s very likely an issue with the mod. Hope this helps.

  94. Where can replacement parts be bought? I removed my device from the mod to clean it and the 510 pin fell out. I assume I need the complete bottom ring?

Leave a Reply

Your email address will not be published. Required fields are marked *

Show Buttons
Hide Buttons