Proton & SCION II Kit

Innokin Proton is a 235-watt high-performance box mod with a first-of-its-kind joystick-style selector and 1.45” TFT color screen display which supports 6 colors.

Unlike anything you’ve seen from Innokin, every component, texture, and material of Proton underwent a complete design overhaul to bring you not only the high quality you expect from Innokin but the innovation factor that stems from its namesake as well.

General Details
Innokin Proton Kit

Change begins from within, some of the most prominent feature of Proton include a brand new 235W chipset, a large and ergonomic side fire panel, and a first-of-its-kind joystick-style selector. Simply move the button left or right with your thumb to adjust your wattage.

Additionally, the 1.45” color screen display (TFT) allows you to choose among 6 colors for your preference, and the onboard memory bank functions allow further customization of your vaping experience.

The kit comes complete with the new SCION II, featuring a sliding top-fill cap and a brand new coil option, the Plexus coil. The Innokin Plexus Coil is composed of a whole KAL panel with aligned holes. This kind of structure guarantees  excellent stability and durability. Thanks to the outstanding structure, its resistance is constant, which can bring you stable great flavor. With higher wattage, it delivers stronger throat hit.



In short, the Proton is all about customization and user experience. It’s quality made affordable.
Innokin Proton. Fundamentally Different.

Kit Includes
1x Proton MOD
1x Scion II tank(0.36ohm installed)
1x Plexus coil 0.15ohm
1x Spare Glass Tube(5ml)
1x Extra Drip Tip
1x USB Charging Cable
1x Spare O-rings Set
1x Vape Band
1x User Packet(QR Code, Quick Start Guide, Warranty Card, Warning Booklet, Battery Warning Card, Stickers)

Specs And Details
Specs And Details

Product Dimensions: 85*44.6*29.6mm
Minimum / Maximum Wattage: 6.0W–235W
Minimum / Maximum Voltage: 0.0V–9.0V
Temperature Control range: 150℃–315℃/300℉–600℉
Maximum Charge Current: 2A
Maximum Output Current: 40A
Atomizer Resistance Range: 0.05ohm – 3.5ohm

1.45″ TFT Color Screen Display
Joystick Selector Button
Side-Panel Squeeze Fire Button
6 Color Display Themes
Individual Cell Battery Life Indicator
Stainless Steel 510 Threading
Dual 18650 Batteries

Firmware Upgradeable
Preheat Function
Adjustable Memory TCR
Temperature Control Suite
Ni200 Nickel, Titanium & SS316L Support
Material and Mode Selection
Low resistance protection
Dual Circuit and Reverse Polarity Protection

Quick Guide
Proton KitProton KitProton KitProton Kit

Review Videos





  1. When is this available in the UK please?

    • Hi Andy,

      Keep your eyes out over the next few weeks, as they should be in stock with your favorite authorized Innokin dealer by then. Thank you!

      • why the hell would you make a high performance mod that only takes 18650 batteries that mod can barely power that plexus coil 21700 would have been a way better choice

        • Hi Neil,

          21700 and 18650 batteries have similar nominal voltage and amperage. Dual 18650s are more than enough to power the Plexus coil. Can you explain why you believe 21700 batteries would have been a better choice? Thanks!

      • Hi I bought a Proton yesterday can you tell me why it gets so Hot you can’t touch it after use, do I have some settings set wrong ? What is the normal wattage to run this this unit at with both types of coils please, love the looks of the proton just wish I could work out why it gets so Hot

        • Hi Chris,

          The Proton runs at a pretty high wattage, which in turn creates plenty of heat from the atomizer. Be cautious when touching the tank, base of the 510 connector, and top of the mod after vaping as it could be hot. If you’re looking for a heat reduction solution, either lower your wattage setting accordingly, or take more time inbetween vapes to allow the device to cool off. Hope this helps!

      • Is their a firmware update available for this device yet? My battery life seems like it could be a bit better. Vs. 20180228-V1.1 Is what I am currently running.

  2. Looks fantastic terrific specification

  3. How much. I don’t even have a Dealer price yet.

  4. Also why not use 20700 batteries. I have the Oceanus and they are ok batteries

    • Hi Michael,

      In a high wattage device like the Proton, we feel confident that 18650s will be safe to handle the require amp load of the maximum potential of the Proton. Remember to buy your batteries from proven sellers and ensure they can handle the load of the device you put them in. Thanks!

  5. just wanted to know when the proton kit will be avaible for sale

    • Hi Josh,

      The first orders for our distributors should be fulfilled within the next week or two, so keep your eyes out for stock at your favorite authorized Innokin dealer! Thanks for your interest!

  6. Innokin does it again with their new Proton! The innovation from Innokin does not stop. They continue to bring high quality products to the Ecig Community. Innokin leads the industry with innovation, quality, quality control, creativeness, new technology, and outstanding people. Be sure to stop by for a complete review of Innokin’s Proton, as soon as I am able.

  7. Looks pretty cool. I was wondering if there is a way to lock the joystick button so the mod isnt continuously changing wattage on accident.

  8. This looks like a beauty but performs like a beast! This one is a home run!

  9. Absolutely Stunning! I entered your contest and would love to have one of these beauties in my hand. It looks amazing. :)

    • Hey Karla,

      Thank you for the kind words! We’re very proud of the Proton and hope it exceeds all expectations. We set out to provide a truly innovative mod that tickles the fancy of both enthusiast and casual vaper alike.

  10. So excited to try this new device. I’m especially interested in what kind of flavor this new coil structure will produce!

  11. 4 years ago my first “real” Vape mod was the Innokin Coolfire 4 40 watt mod. Since then I have become a high wattage VapeR and Innokin generally stayed in the 75 watt or below market…This new Proton mod looks awesome and I know it will be well built coming from Innokin. Will just the mod only without tank also be on sale?

  12. Hi, I recently picked up an Oceanus kit and I was wondering if the new scion will have a rebuildable deck? I would love to have the whole kit if so. If not will I be able to buy to mod separate?

  13. Please tell us when this beauty is going to be available for order… I’ve been holding out for weeks and i need a new mod as my old mod’s fire button is breaking, and dont want to have to order something else instead of this. Can you give us an idea of how long? One of the previous comments said keep an eye out in the new few weeks and that was from April 5th…

    • Hello Zach,

      Batches are being shipped out to Innokin distributors as we speak! Not much longer now before they will be available to order. Do let me know what you think of it once you pick one up :)

  14. Hey was wondering where I could order one of these right now?? I can’t seem to find anywhere that even has them in stock right now:(

    • Hi Peter,

      They are still on preorder and are shipping to authorized Innokin distributors worldwide right now! Expect to see them available for purchase in the very near future. Thanks so much for your support!

  15. When will this be available? Is it only for the UK? Or US as well? I’m in the US and really want one.

    • Hi Kaycee,

      The Proton will be available worldwide. It’s releasing extremely soon! Keep your eyes peeled for it to be in stock at your favorite authorized Innokin distributor. Thank you!

  16. When will this amazing piece be available for sale??

    • Hello Zach,

      Very soon! In fact, many of our authorized distributors are taking preorders. The Proton is sure to be a huge hit, and the first batch is likely to go fast, so don’t miss your chance :)

  17. Are the coils for the scion tank compatible with the scion 2 tank???

  18. is the Proton coming out on may21 ? and were cani preordered the proton mod kit

  19. Hi team.
    I live in oz and currently using the kroma+zenith which i love and cant recomend enough? have been researching for a while about a DL setup? stumbled across a review about the new proton? so i am going to stick with the brand i can rely on.. so soon as available in ?? in gettin one? cheers

  20. My last vape the 510 thread on the mod broke off because it was glued on. will I have the same issue with the Innokin Proton?

  21. Can’t wait any longer please hurry, and what batteries do you recommend for it?

  22. Will Sony VTC5a 18650 batteries be appropriate for this device?

    Nominal capacity: 2500mAh
    Rated capacity: 2500mAh
    25A max continuous discharge
    18mm diameter
    65mm length
    Nominal voltage: 3.6V
    Charge voltage: 4.20+/-0.05
    Cut-off voltage: 2.5V
    Flat Top

  23. When I was looking for info on the plexus coils all I could find was the .15 resistance so I was going to pick up a few of the Sony VTC5a batteries for the Proton because they should have the power to push the .15ohm Plexus coils to their limit

  24. Will this work with the iSub coils and tanks? I have a small stock pile of those and don’t want them to go to waste.

  25. I noticed on “My Vapor Store” and other vendors. The proton comes in both “black” and “gunmetal” color choices. I see the difference in color on the Proton mod, but in some images they both seem to come with a black scion ii. Other images seem to appear that the scion ii tank is in “gunmetal” (black/silver) which the scion ii doesn’t usually come in, which would be neat. What color of scion ii comes with the “gunmetal” proton mod? Am really wanting one and just want to be sure.

  26. Is there a white version coming out? I saw one in the initial pics of the announcement, for the Proton, on instagram.

  27. Will the bubble glass be sold separately? I bought the Scion II tank with Plexus coils hoping the bubble glass would be included but it wasn’t. Awesome tank and coils btw.

  28. Will a proton be available in a stand-alone model (not in kit)? And, if yes, where would I find one?

    • Hi Shane,

      Yes, the Proton will eventually be available as an Express kit (mod only). However, I cannot share any details in regards to the availability or release of the kit at this time. Thank you!

  29. I recently purchased the Innokin Proton Kit and i have to say, I’m impressed. I have been vaping for a while and tried all kinds of vapes and by far the Proton is the best one out there. It’s fully customizable to suit your specific vaping preferences. Also the joystick is a super neat feature that makes changing your settings a whole lot quicker and easier. I strongly encourage anyone that vapes to get the Innokin Proton.

  30. The Proton is a great mod but I wish it has a stealth mode! Would be possible to add that in a future update? And by the way where can you see if a new update is available?

    • Hi Mik,

      Future updates should be featured on this very product page.

      Thanks for the feedback regarding stealth mode. I agree with you, I think it’d make for a great addition to the Proton. Thank you and happy vaping!

  31. The USB charge port already failed on mine after 10 days, is this a typical problem?

    • Hi Nick,

      No, this is not typical. Contact your vendor you purchased it from for a replacement. All Innokin products have a 90 day limited warranty against manufacturer defects.

      If they won’t help, contact us with proof of purchase and a description of your problem at Apologies for the inconvenience.

  32. Hello,

    Looking at the Quick Start guide, it says, “For full content, please refer to user manual on the product page at INNOKIN.COM”
    I can’t find any full user manual for the Proton anywhere on this site, let alone this page which I believe it is referring to.

    Can you please direct me to this user manual?

    Thank you!

  33. Where can I find out what the latest available firmware is? Is there anyway I can sign up for notifications on when updates are available?

    • Greetings B0rkedBear,

      This page will update once new firmware has been released. You can subscribe to our email newsletter for all the latest updates regarding Innokin products and promotions. Visit our main site page ( to sign up to our email newsletter.

      Thank you for your interest!

  34. When to buy in Germany?

  35. Hi, Put it in my pocket on its own and the screen scratched up pretty bad. Not sure how, kind of annoying. Anyway is there a way of ordering a replacement screen assuming i can just replace it without messing with the lcd or control.. Ive only had it for a week.

  36. Battery wobble! Not sure if my device is defective or not but my batteries will wobble randomly and I have to take them out tap the device put them back in to fix the issue almost like the battery pins get stuck what can I do about this?

  37. My proton device seems to be having some type of contact issue on battery A. Is there a way to reset this? While I’m watching the battery A display bounces back and forth between 0% and 100% – not pressing the fire button. Changed the batteries and cleaned the contacts but still happening. What do I do?

  38. Will this mod work with your Ares RTA Kit?

    • Hi Brian,

      Absolutely! The Proton is compatible with practically any 510 threaded atomizer on the market. You can even customize your own wattage curve for your Ares coil with the Proton. Thanks for your interest!

  39. Nicholas Boullester June 21, 2018 at 1:39 am Reply

    would it be possible to get some specs on the chipset? I friend of mine has this mod and I jokingly said we need to put doom on it…. The problem is I can’t find any specs on the chip inside to see if it would even be possible to support it. Seeing as doom has been put on calculators, etc etc… this seems possible.

    • Hi Nicholas,

      Sorry to say that we cannot share that information. If you can manage to get Doom to run on it regardless, we would be very impressed, and love to see it!

  40. Plan on ordering, but I hear the screen scratches easily. Where can I get a screen cover and/or sleeve for this?

    • Hi M,

      Just purchase a customizable, cuttable screen protector and affix it to the Proton screen. So long as the joystick isn’t covered, it should work fine. Thanks!

  41. When will the Proton Express Kit be out? You announced it on Reddit a while ago.

  42. I’d like to second the call for adding a stealth mode to this mod. It’s really the only drawback for me with the Proton. Being able to vape without the screen lighting up at all is a key feature I look for in any mod I buy. I realize you can turn the brightness down to 10% and the timeout down to 3 seconds, but that’s not ideal. Really hope you guys can work in a stealth mode in the next firmware update. This mod looks fantastic otherwise!

  43. I just received the Proton and after using it for an hour, the screen won’t light up. I’ve turned it off and then back on, removed the batteries, still won’t light up. Is this a defective device, or is there a reset that might fix this?

    • Hi Brian,

      Can you verify that the batteries are functional? If you’ve ruled them out already, I would suggest getting the device exchanged for a new one. Contact the dealer you purchased it from our email us at to start a warranty claim. Apologies for the hassle!

  44. 316l mode isn’t working correctly. On my Coolfire Ultra my scion2 and rta with 316l ss vapes beautifully at 205’c but on the proton it’s way off. It’s like the TCR value for 316l mode is wrong. In TCR mode it’s fine when I set the TCR correctly. I’ve even tried my iSub V tank with SS BVC coils and it’s way off. I let my coils rest before attaching to my mod.

    • I would like to know what is going on that makes you think it isn’t working correctly? For starters 205c or roughly 400f is pretty low for a temp setting and if I recall correctly the coolfire ultra fired high when set to 205c. The coolfire ultra would actually fire the coil at 227c when set to 205c or 440f when set to 400f. The proton does not do that or at least doesn’t do that to such a degree so it may feel like it is throttling down much earlier than with the coolfire ultra. I have noticed this comment coming from a few people who all seem to be coming from fairly inaccurate devices. The temp control with the proton seems to match or exceed what I am used to with my DNA and yihi devices.

      • Hi Michael,

        With the Proton, firing in 316L mode is too hot. Much too hot. I have to turn it down to the minimum setting of 150’c and it’s still too hot for my coils, which work perfectly on other mods. I’m using TCR mode now, setting it to 88 and it vapes well. Maybe my Proton is faulty? Like it’s not calibrating correctly? I rest the coils to room temp before attaching to the mod.

  45. I just bought it and I am quite happy with it.
    But I miss a clock. Will you implement that via firmware update or will it lack that nice feature?
    Would be very nice to have that.

    • Hi Michael,

      Thank you for your support and purchase! I do not believe we are working on implementing a clock function for a future firmware update. Sorry about that!

  46. This is my first “grown-up ” vape! I would really appreciate the manual to be able to actually use it for a better experience than just a basic vape. The videos I found are really just reviews not explanations on how to use the “bells and whistles ” of the Proton. The best video on YouTube explaining anything is by Zophie Vapes.

    • Hi Tonia,

      You can access the menu by clicking the joystick button 3 times in rapid succession. Then, navigate using the joystick and clicking it in to confirm your selection. It should be fairly self explanatory after that. If you require more specific help, please let me know and I’ll follow up. Thanks for your purchase and support! <3

      • Frank, I have the same issue as Tonia. I just got this as my first real mod and I need an education to know how to set the settings. I understand how to use the menu and joystick, but I need guidance on what settings to choose. I am getting a very hot hit and not much vapor so my settings must be off but I don’t know what to change to get a better vape. I am using the coils that came with the kit, but I can’t find any info on what to set the Coil menu at (wattage/SS/Titanium/NI. I have tried lowering wattage down to 60 and temp control down to 300 but still getting a very hot hit so I can’t pull longer than a second or two. Is there a User Manual that explains all the options?

        • Hi David,

          Assuming you are using the Scion II, use standard wattage mode and start at 50w. Make sure your airflow control ring is open to your liking and up your wattage in increments of 2.5 up until you are most comfortable with your vape. Hope this helps.

  47. Hi,

    Is there any firmware updates available?

  48. Hello Frank I live in the U.S. and I cannot find the Proton mod just by itself without the tank anywhere. I only use rebuildables mostly just RDA’s but I would really like to get the Proton by itself. Can you tell me when the “express kits” for the Proton will be available here in the States?

  49. Hello, i got my Proton+Scion II kit today, and sadly i have some issue with it.

    I’m using Samsung 18650 25R batteries, i have 4 of them, and battery “B” shows as being depleted (red) even though the batteries are fully charged. I tried different combination with the 4 batteries, but “B” always shows in red.
    The mod seems to work fine, but i’m having some safety concerns.

    Is this a known issue ? And is it just a display bug ? Should i be worried ?


    • Hi Johnny,

      That’s a strange bug indeed. I don’t think it will cause any issues if it’s still vaping despite the false power indicator, but it’s worthy of being replaced by our manufacturer’s warranty if you so choose. Please contact us at with proof of purchase, a brief summary of the issue and pictures of the interface if you’d like to go that route. Sorry for the trouble.

    • after using the proton since early June, I’ve developed a similar issue but on the opposite side. Side A is now showing half depleted with fresh batteries. I’ve also tried multiple sets of batteries in different placements, but side A is always showing half (it kind of moves a little between 50 and 75 as i watch it). I even tried cleaning the battery contacts of the device and no luck.

      Waiting to hear back from the Innokin support channel….

  50. Like design, disappointed in quality. After about a month or so of use the device now shuts off on its own. I have a set of 18650 SONYVTC5 and a set of Samsung 25R. No matter which set I am using, same result. Example. I power it up (which I now have to do EVERY time) by clicking 3 times. I vape once or twice and set down on my desk. I watch the screen dim then turn off. I pick it up to use it, and its off. This is my first time trying a brand other than Kanger, which I am back to using today. I have no interest in returning item, not worth the effort. I simply wanted to post my opinion on product. A shame, great looking product!

  51. Hi
    I’ve had the proton for a week now and I love it but the screen has gone completely white and blank. I can still vape but have no access to the screen. It has not been dropped or exposed to any water.

    • Hey Ben,

      Sorry to hear about the issue you’re having with your Proton! Could you please take pictures of the issue and send them to our support email, They would like to see the issue first hand and will assist you in getting a replacement. Thanks.

  52. I’ve had this mod approximately a week ..for £60 I’m not overly impressed . The fire button has quite a bit of movement side to side . When I rub my finger lightly across the display screen there is movement and it makes a light clicking noise and the paint on the top of the mod is already wearing off after a week’s usage ..??

    • Hi Richard,

      Sorry to hear about your finish issues.

      Unfortunately, we do not cover aesthetic issues via our warranty. I would suggest being more cautious with the mod as you would with any electronic device- handle it gently and it’ll last you a long time. Be careful stuffing it into pockets with loose change or other abrasive materials as this will damage the finish. Thanks!

  53. Hi there. I am using the proton kit now for one month and besides that it lacks a clock
    Which I find very disappointing, the paint (gun metal) starts to peel off at the parts where my fingers are most of the time. I am taking the
    Proton around in the pockets of my jeans and in my backpack (in a small, soft pouch).
    Second thing is, that I got three times a black piece of what I think is part of the coils that has
    Tiny holes in it in my mouth while vaping. I guess its parts of the mesh.

  54. Is there a brand of 18650s that are recommended? I bought some, put them in correctly and the battery door won’t close.
    Help please

  55. Hi!
    Do you work with retailers in Russia?
    Innokin production seems very much underrepresented, but demand on devices is high.
    I can get almost any device easily here, but not Innokin’s (i found literally two in some almost shady shops and Proton is overpriced there).
    So, are you planning to ship these to Russia?

  56. Any firmware updates yet , love the device by the way been working great for me . Although I do love the plexus coil very much currently running the vandy vape triple rta powers it like a charm. You say use Sony batteries I am using 18650 lithicores will tose be ok ? Thank you I’ve tried other products and always seem to go back to innokin :-)

    • Hey Joe,

      No firmware updates yet. Glad to hear you’re enjoying the plexus coil!

      In regards to batteries, it’s important to know how high of an amperage rate they can support. Most batteries suitable for the Proton are 25-30A continous and 40A peak. Lithicore should be ok if they are within that amperage range. Thanks!

  57. Hi there,
    Really love the look and feel of that new innokin.
    I started using it today and I am experiencing two issues I hope you may help with. First it gets damn hot I put it down pick it up again and after each puff it gets mega hot. Wattage see at 40 as im scared to go over in case I burn something.
    Secondly, the liquid escape via the vent so I now have to keep it close which detracts from the whole experience. I had my Proton in my pocket with the vents opened has a puff back in pyjama pocket and was burnt by hot juice coming out of the vent.
    I always used Innokin and never experienced this before. Please help as I may be doing something wrong? I’m using efest batteries

    • Hi Nick,

      Please only use genuine authentic high quality 18650 batteries with your Proton. Efest are not a reliable manufacturer and could be the issue of the heat. Try Sony, Samsung, LG, or Ampking instead.

  58. Hi,

    the support link redirects to a surveymonkey site, where can I check the firmware for the Proton?


    • Hi Paulo,

      The surveymonkey should be a form to fill out to contact our support. Please email us at if you have any warranty or support related issues that need addressing.

      The Proton does not have a firmware update at this time. When one is released, a download link will be found at this page. Hope this helps!

  59. Hello,

    where is it possible to find and download firmware updates? Mainly for Proton, which has issues with TC? :)

    • Hi Jan,

      Proton firmware updates will be found on this page once a firmware update has been released. As of today, there has yet to be a firmware update released for our Proton mod.

  60. Love the Proton so far. Just a couple questions:
    1. How do I lock/unlock joystick so I don’t accidentally change settings?
    2. Does Proton have battery protection from over- draining battery… will it shut off automatically when battery is too low? Or should I just change out batteries when indicators are red?

    • Hi Kat,

      There is no stick lock, however it requires more than one input to start actually making changes to your settings. It’s hard to happen in a pocket or bag.

      The Proton does have voltage protection. Typically the battery indicator will start flashing when the batteries are extremely low in power. If they get too low, the mod will turn off entirely. At this point, the batteries should be charged. But it’s best to charge them before they get that low to maximize your battery lifespan.

  61. Hi
    Literally for or five puff and it the scion 2
    Gets really hot. I like vaping at 80w and having more than 5 puffs and not feeling like its going to overheat the batteries and blow up in my face. Im really annoyed because the tank and mod is amazing. Can the overheating problem blowup the batteries???

    • Hi Louie,

      No, the Proton is equipped with overheating protection circuitry among many other protections to keep your and your mod safe.

      80w is a lot of power, and it’s normal for your mod and tank to heat up after being used at that power. Try to let it cool down a bit before vaping again if it worries you. Hope this helps.

  62. Just got my proton yesterday. Seems to be working great except in both Tc and wattage mode almost every time I fire the coil, the coil select screen pops up. Whether I select same or wattage or TC mode, it keeps popping up. Using an ss316l coil .4 ohms. Any help will be appreciated because I don’t know if this is normal or if my proton has an issue

    • Hi John,

      This means there is an issue with your coil connection. Make sure your coil is properly tightened and try again. Also make sure your 510 threads on both the mod and atomizer are clean.

  63. Hi I have been using my proton for a few months now without any problem but for the last week every time I put a set of charges batteries in it does not work and the screen gives a message saying high battery voltage . Can you tell me what this means and how to rectifi it .
    Cheers gordon

    • Hi Gordon,

      Please email us at for more help. I have not heard of that error so unfortunately I cannot be of help at this moment. Please message us as soon as you can.

      • Hi Frank:

        Was just wondering if you have more information at this point on this issue?

        The same message appeared on mine. Now it won’t power on at all!

        Let me know, I like it so much and can’t wait to use it again!

        • Hey Krystel,

          It’d be best if you can contact our support team for this matter. You can email them anytime at Please make sure to describe your issue in detail and provide pictures if you would find them helpful to us. So sorry for the issue, hope it gets resolved quickly. Thank you for supporting Innokin.

  64. Just wanted to say how much I love this MOD. I bought the all black MOD only version. I’m running the Zeus RTA and it vapes beautifully on this device. I use SS316L 26 gauge round wire and I’ve also been braiding that same wire with 3 strands. The Proton is a beast in temp control. It is the smoothest vape I’ve ever experienced in temp control. The chipset in this device is top-notch as far as I’m concerned. I love the design and ergonomics as well. I will be ordering a second one soon. The only improvement I can think of is for the 510 to be centered. Maybe in version 2! Thanks Innokin!!

  65. Hi was just wondering if and when there will be firmware update for the proton? And if there could be a layout change or put ur own pictures on the front or something? Thanks

  66. Hi how do you turn the ohms up thanks

  67. Are there any battery covers or anything like that for this mod? Also any news on any firmware updates

  68. Newly bought it (INNOKIN PROTON) and had it for two days. But i have a serious leaking problem, i use the booble glas and all o-rings is on place. Can the problem be that this tank cant handle 50/50 juice?? Or can the be bad caset on the plexus coil.

    • Hi Gisle,

      It should be able to handle 50/50 juice no problem. A few troubleshooting steps for you-

      Replace the o-rings with the included replacement o-ring pack in the box of your kit.

      When filling the tank, ensure the airflow holes are fully closed. After waiting a few minutes, you can open your airflow back up again.

      Replace your coil.

      Hope this helps.

  69. Hi, I bought the Proton a few months ago, loved it.. about 2 weeks ago, I put in a new coil and within 24hrs, it was burned..the coil I am using is the Innokin Scion Kanthal BVC 0.5 70-110W…I am now on my 3rd coil in 2 weeks because they keep burning, can’t put my wattage up past 64.0 or it burns my mouth… I have tried to figure out what is wrong, but can’t… any suggestions? Thank you

    • Hi Cassie,

      There are a lot of factors to consider when it comes to coils tasting burnt. It can be your juice, 510 connection, coil priming method, tank fill method, etc. I suggest making sure both the 510 threads on your tank and Proton are nice and clean, opening up the airflow on the tank more, and waiting a little longer between puffs to extend your coil lifespan. Make sure the juice you’re using is free of artificial sweeteners as they will gunk up your coil quickly and cause a burnt taste.

  70. I got my proton towards to end of July, Absolutely love this mod but of late I have been having ‘battery’ issues. I use an external charger for my batteries and most of the time the battery indicator on the screen does not go down through use and then inevitably will just cut out on me when the batteries are dead without warning. I took my mod back to where I bought it only to be told my batteries were the issue and so I purchased two new batteries. It is still doing the same but it is also now firing up but not putting any power through to the tank for me to vape though I can hear it firing up? Any suggestions to try to fix this problem for me would be much appreciated :)

    • Hi Gemma,

      Check the battery contacts inside your Proton. Make sure they are totally clean and not damaged in any way. Those are likely to be the cause of the issue you’re having.

      You are still within the warranty window, so if cleaning the contacts doesn’t help, please email us at as soon as you can for warranty work. We’ll replace or repair your device. Thank you!

  71. Dear Frank

    I’ve been using the Proton since May and really like the feel of it. Very ergonomic, user friendly and great battery life with the dual batteries. However, I’ve had several issues:
    – Loose battery door (batteries fell out onto a hard surface causing damage and had to be replaced)
    – Loose 510 stainless steel plate
    I contacted Innokin support (UK), who said take it to the store, the store said contact Innokin support (UK) again who have not replied.
    As I like using it, I have managed to fix it myself by unscrewing the top cover and tightening the screws holding the 510 (It’s not a push-fit as mentioned in the above comments). As for the battery door, I’ve unscrewed the screw slightly at the latch side to give a grip to the door.

    The final straw is that the joystick is failing and I can’t adjust the wattage. I’ve been using Innokin gear exclusively for several years and never had problems like this. Shame as it looks and feels great. Looks like I’ll be going back to the old Cool Fire 4 Plus. Still works perfectly after two years!

    • An update to my above comment.

      I had a local vape store repair the joystick so it’s back in action. I still like the ergonomics of this mod very much. However, I’d like to suggest some improvements:

      – Ditch the Joystick, or improve the durability of it.
      – Add a secure latch to the battery door (like the Aspire Speeder)

      This would make it probably the best dual 18650 mod in this price range.

  72. hi i have proton but how can i update the mod? i can’t find the software on the website

    • Hi Pol,

      Currently there are no firmware updates available for the Proton. When one is released, you’ll be able to find the download link with instructions on this page. Thank you!

  73. Hello, what types of 18650 batteries do you recommend for the Proton Plex? Can you recommend a Sony VTC type? Not sure what amps, etc. will work for safety and reliability.

  74. Best kit I have owned to date, the plexus coil is amazing.

    The only thing I’m wondering is if there is a way to have the mod autolock. I keep forgetting to turn off the mod when I put it away (force of habit, from a previous mod).

    • Hey Yura,

      Thanks so much for the kind words, it means a lot to us!

      There is no auto-lock feature with the Proton. The joystick will not respond by default to a simple directional input without a middle click first. If you are worried about the mod firing in your pocket or otherwise, you’ll have to remember to turn it off first.

  75. Hi i just purchased the kit along with 2 Samsung INR18650-25R 2500mAh Batteries and for some reason the batteries do not fit when i put the batteries the door won’t close. It can be force closed only from the positive side the battery door won’t shut from the negative side specifically for some reason.

    • Hi Sherif,

      There is a bit of technique to getting the Proton battery bay closed. Insert the batteries, then push the battery door as far forward as possible. While it’s fully extended, push it down, then slightly backwards until you hear a click. Hope this helps.

  76. Hi, I’ve had my Innokin Proton Mod for a couple months now and every once in a while when I charge the batteries and then put the batteries back in my mod, the whole mod factory resets itself. What could be causing my mod to factory reset itself when I turn it on?

    • Hi Dustin,

      That’s a strange problem indeed, and not one I have heard of personally yet. I would imagine it would be a memory problem within the chip. When power is totally lost, it loses its settings. Maybe try charging the batteries from within the mod to see if it prevents the issue.

  77. Hello Innokin

    I have purchased the Proton kit, and it is absolutely incredible. Really loving it so far.
    I’ve been trying to find some information on batteries and such but am struggling to find the answers I am looking for and instead getting conflicting information.

    I have the Samsung 25R batteries that you recommend with the mod, but have a couple of questions.
    From what I’ve gathered reading, the duel batteries should not be used any higher than at 120watts. I’ve also read that the batteries shouldn’t be used with coils under a certain resistance.
    So my questions are:
    Are the batteries suitable to be used with the 0.35 coil at 150watts?
    And are the batteries suitable to be used with the 0.15 coil at the recommended wattage? (coils in the UK package)

    Sorry if this is long winded, but I’m really struggling to find any answers.

  78. Hello

    I’ve picked up the proton kit and really love it, but I’m struggling to find solid answers on batteries.

    Will 2 x Samsung 25R batteries be suitable to use the 0.35 coil at the maximum recommended 150watts?
    And will the batteries be suitable to use with the 0.15 coil at the recommended wattage?
    I’ve read somewhere that the 25R batteries shouldn’t be used over 120watts, and that they shouldn’t be used if the coil resistance is too low.
    Hope you can clarify, as I’m really loving this product.

    • Hi Keir,

      The 25rs are a solid choice for the Proton, but if you plan on using the .15ohm coil at a high wattage, you may want to opt for a battery with a higher max amp draw, like the Sony VTCV5A. Hope this helps!

  79. Hi,
    Will there be a firmware update for the proton anytime soon. Or does it not require one

  80. Hey Frank

    Thanks for your answer, but I don’t think I was clear.

    Will the Samsung 25R be okay to use with the 0.35 coil at 150Watts? And would the batteries be okay to use with the 0.15 coil between 60 – 110Watts?

    Or, if I want to use the 0.15 coil, should I just get the recommended Sony batteries anyways?

    Thanks again

  81. The Proton is an okay Mod, but to be great, it needs a CLOCK!!! For this kind of money the next firmware update need’s a clock or there are better Mod’s for less money. Now the Scion ll, That is a winner all the way around!!! So come on guy’s give me a clock! So I don’t have to look for another Mod.

    • Hello Gunner,

      We very much appreciate the feedback! A clock could be added via a firmware upgrade in the future. I will run it by our team and see what they say. We are always looking to gather feedback on any of our products and again thank you for sharing your input. Thanks for the support and have a great day!

  82. Hey so I’ve had my proton kit for awhile now and i love how the tank lights up when you take a hit, but yesterday it quit lighting up and i was wondering if the light was out or what? And what i need to do to get it back to working again, thank you!

    • Hi Destiny,

      I’m not quite certain what you mean by the tank lights up. What tank are you referring to? To my knowledge none of our atomizers light up when they are being used. The Proton screen should light up, but nothing else.

  83. Hello,

    I see a post 31st May from someone trying to find the User Manual for the Proton, which the quick start guide says is on your website.

    I see the User Manual is still not available on your site. When is the manual going to be available?

    The Proton has quite a few features which would be great to have information on how to utilise all the features and what each feature does.

    • Hi J.J,

      I am uncertain of when the Proton manual will be available. That being said, if you have any specific questions or concerns, please feel free to ask me and I will do my best to assist you. There are also quite a lot of Proton reviews and informational videos found on YouTube if you need more immediate help.

  84. Hi, Just wondering if and when there will be firmware update for the proton? Thanks

    • Hi Isaq,

      There is currently no firmware update available for the Proton, however there may be one in the future if we implement a new software feature or bugfix. Thanks for supporting Innokin!

  85. Hi I purchased an innokin proton kit a little over two months ago. 2 days after purchasing it my joystick ( downward click) stopped working. I attempted to bring it back to the vape shop that I purchased it from and was given the runaround. I live in the US and seen the customer service number was for Australia only. I have been having trouble figuring out where to have my warranty serviced. Can I have a little help with this before my warranty expires?

    • Hi Andrew,

      Sorry to hear about the issues with your Proton and your vape shop not helping you out. We offer direct manufacturer warranty through our support line, which you can reach at Please email us at your earliest convenience to open a warranty request. Attach proof of purchase (copy of your receipt) and a brief description of your issue and our lovely support staff will get you on track to a replaced or repaired Proton as soon as possible. Keep in mind our warranty lasts for 90 days after purchase.

      Apologies for the inconvenience and have a great day!

  86. Hi, I recently purchased a Innokin Proton kit with the Scion 2 tank with the new Plexus coils and just love this unit. I have a couple questions.
    1. I noticed the oring kits (seal repair kits) for the Scion 2 tank do not come with the top fill seal (white gasket) which I am lead to believe is not replaceable as it can be with the new Plexus tank, please advise if this is so and also where I can purchase replacement seal kit.
    2. I have not seen the Plexus tank available at any of my local vape shops and noticed I can not as of yet order directly from the online store as I reside in Canada and cannot set up an account because of my location.

    Also in regards to the tank seal repair kits I was told that the vendor has to order a significant quantity which may lead to excessive stock. Your answers and help would be much appreciated.


    • Hi Kevin,

      Thanks for picking up a Proton kit, glad you’re loving it!

      1. Any repair parts can be purchased from and if you can’t find what you’re looking for there, or out of the USA, email our support directly at

      2. The Plex tank is available on its own from plenty of online stores, across the world! Make sure you’re searching for the “Innokin Plex Subohm tank”. You should find more results that way.

      What you’ve heard is potentially true, which is why many vendors choose not to stock replacement parts kits. You’ll have better luck contacting our support for out of USA kits. Thanks and have a good one!

  87. Hi.
    It’s an overall nice mod but I have a problem running ss316l coils. I have to manually set TCR because ss316l mode just burns everything.

    Any firmware update on the schedule to solve this issue?

    • Hi Decio,

      Thanks for the feedback. I do not believe a firmware update to adjust the SS316l default mode is planned, as the custom TCR coefficient can solve the issue for end users. SS curves tend to be off by qute a bit depending on the specific grade of stainless steel. Sorry about that, thank you for supporting us and have a good one.

  88. Hi,
    I just got my mod and I am not sure what I am doing wrong. The mod keeps shutting off and the battery rattles inside. I am using dual18650 batteries, which worked great in my previous mod that I had from SMOK.
    I switched to Innokin, however, the device shutting off and resetting is troublesome.
    What am I doing wrong? The batteries I am using are from LGH2.
    The only thing I can think of is getting new set of batteries or mod is defective?
    Any suggestions on dual batteries that have been working for other users?

    • Hi Maoish,

      This issue sounds like a tolerance issue with either your batteries or the Proton.

      Do you have button-top 18650 batteries to try? They are typically longer than the standard 18650 and could help keep the batteries in place so they don’t impede your ability to vape.

      Many high-end batteries are available in button top styles from suppliers such as illumn. Hope this helps.

    • I have the same issue.
      I used some tape to wrap the batteries (on top of the factory wrap) and it helps. The batteries don’t rattle anymore and the mod stays powered on.
      Sometimes though (I don’t know why) it still loses power due to bad contact (I guess), because putting some tape from front to back (start on top of the front Innokin branding and go over the door tightly to the back side). This helped too, I hope it will help for you too.

  89. There seems to be a known issue with the battery door being loose. Just got mine with the plex tank and now I am VERY DISAPPOINTED. With just the slightest jiggle of the mod it shutdowns and restarts. This is the first time I have had a problem with Innokin products and can’t believe such a simple design flaw made it to the production line. I seen the response to use a certain “style” of batteries and if that is the case then it should be a disclaimer some where. I ordered my kit and batteries at the same without knowing this and now I’m out the cost of the batteries (Lithicore IMR 18650 LiMn 3000mAh Battery – 20 Amp).

  90. I’ve had my kit for about 10 months now and I have been generally please although lately the kit has been reading coils incorrectly. I’ve used countless 0.15 Plexus coils and it keeps jumping between ~0.19 and ~0.28 resistance. I’m using a quad coil one now, similar to the one that came with it, and it is reading it as 0.47.

    Is there anything I can do? Will a factory reset work? or even do anything?

    • Hi Eamon,

      Coil reading inconsistency is a common issue that can typically be resolved fairly easily. First, fully clean the 510 threading on your tanks as well as your mod. Use a cotton swab with a tiny amount of rubbing alcohol and wipe it all clean. Use the other end of the cotton swab to make sure the connector is dry and dirt-free. Then, try vaping again. If there are still inconsistencies with your ohm readings you may have an issue with the pin itself being damaged or depressed past the internal o-ring of the mod which in that case would require a repair through our repair center or you could try your hand at fixing it yourself. As it’s out of warranty, a repair cost would be necessary. You can contact our support and warranty staff at via email. Hope you find a resolution to your problem quickly and have a great New Year.

  91. Hi, I’ve received a proton for Christmas and disappointed that it doesn’t seem to have batteries with it. Was wondering why?
    Many thanks

    • Greetings Mike,

      The Proton uses external 18650 battery cells. You’ll have to purchase 2 of them separately to use your Proton. We recommend Sony VTC5A as the top performer for high wattage vaping.

  92. Hi,
    I have had my kit for 4 months now and it was going great. However I started to experience issues with the battery. It keeps charging then nothing happens. Then it shows the batteries blinking and a message says low voltage battery?. Really weird. I purchased new batteries yesterday hopeful it will fix the issue but still no joy. The mod refuses to fire up and I get the same blinking batteries appearing on screen and a warning of low voltage. Please help

    • Hi Nick,

      Sorry for the trouble you’ve been experiencing. Please check the positive and negative battery contacts inside the mod and make sure they are clean. Use a cotton swab with a small amount of isopropyl alcohol to wipe them clean. Then, reinsert the batteries and see if the problem is resolved. If not, you may have to order button top 18650 batteries to ensure a proper connection is being made.

      • Still waiting for the following fixes via firmware update:
        1- TC accuracy in SS 316.

        2- Make the device accurate with the true TCR values, or at least publish the accurate TCR value for SS 316 for proton. The true TCR value for SS316 is not proper and accurate for proton and it burns the wick. Tested with 6 SS 316 manufacturer brands.

        3-Reduce or remove the spike in the beginning of each fire. Currently, this spike reduces the life of the wick and shortens the life of batteries.

        please add clock.
        Please add a multi color screen option instead of the current single color themes.
        Please make viewing themes and layouts available.

  93. Hi all,
    New to vaping and just got my self an innokin proton with the scion 2 tank.
    I was wondering if can use a lower wattage Rothes the coil recommends, I’m using the quad coil as it seems easier on the throat.
    It’s the 0.36 ohm and recommends 80-150w’s on its side. What’s the lowest wattage I can use, the innokin goes from 6-235w I believe.

    • Hey Bow,

      Thanks for picking up a Proton! We’re happy to have you as part of our vaping family :)

      You can start vaping it around 70w no problem. It might be a tad anemic, in which case I’d recommend bumping the wattage up to 80w. Hope this helps.

  94. Hello!
    I love my new Proton kit a lot and I’ve gone through some Vapes. Is there any type of cover or even better a silicon Case for this thing. I work outdoors and really want to keep this thing nice and clean!!! Please!!


    • Hey there CJ,

      Thanks for your support! Glad you’ve been enjoying your Proton kit. We do not offer official silicon cases or covers, but you can probably find third party accessories on eBay or Amazon, or online vape shops.

  95. How do I change the ohms as fitted the 0.15 coil and it recognises it as a 0.13 instead can i change it ?

    • Hi Peter,

      It’s very normal for a coil to be slightly off-spec. Unfortunately, it’s not possible to adjust or change the ohms of a coil. It’s also normal for the coil ohms to change as the coil heats up and cools down. Hope this helps!

  96. when should we exspect a firm ware update for the innokin proton

  97. Been using this Proton for 2 weeks now. All was going well and it was one of the best kits I’ve used. However the charging port on the unit has stopped working and makes it impossible to charge or use. Even trying to wiggle or position the charger at different angles does not work – the port is completely broken. I now need to either purchase a wholly separate battery charger and a spare set of batteries to be able to use this again, or buy a whole new (probably different) unit. Not very happy.

    • Hello Alex,

      I am sorry to hear about your micro-usb charging port breaking. Unfortunately, these charging ports are quite delicate, and are meant to be used as a backup method of charging when a separate charger is not available. The best way to charge 18650 batteries is through a separate charger. I’d recommend going ahead and purchasing one of these chargers to get your mod back up and running. We recommend brands such as Xtar and Nitecore. Thank you!

  98. I recently purchased the proton scion ii kit. Overall I love the mod, but I have 2 problems.
    The first is not major, but I have found the fire button a bit loose. It still fires well, but can have a rattle which is annoying.
    Second problem is the joystick is not as firm as I thought it would be and has a lot of downward play. Left and right work fine, but if I click down sometimes it will not register. This means to change wattage I have to scroll left and right, rather than up and down which can be frustrating.
    Innokin you have made a top mod, but it would seem your quality control is letting you down.

    • Hi Ian,

      We appreciate the feedback wholeheartedly.

      To alleviate the loose fire button, try tightening the top 4 torx screws on the Proton. The thread is T4 Torx I believe.

      As for the joystick, as you’ve mentioned, unfortunately they can be a bit fussy. We are working on improving the overall consistency and quality of the joysticks in each batch.

      Thanks for your support and happy vaping.

  99. When can we expect new firmware for the proton?

  100. Hi! For some reason battery B always seems to read lower than battery A? I externally charge and use both VTC6 and VTC5A batteries and happens with both. Any help is appreciated. Cheers!

    • Hi Ryan,

      This can be due to a number of issues, but the most common would be the battery contact. Check that battery bay B has clean contacts and there is no physical damage. If that is the case and it still reads improperly, try using a button top 18650 cell in that bay. Hope this helps.

    • Same as mine. Worse with Samsung 25r though.
      Tried double wrapping and did not work.
      Guess will to buy new button top 18650’s.
      Happened since I got it, so it’s not damaged caused by us.

      • Have had mine for about a month now, as my first ever mod. Been using either Ampking AK2025s or Molicel P26As (which I prefer,btw). Both flat top 18650 batteries. Absolutely no issues with contact, solid as stone. Only issue being a rattling side panel opposite the fire button which I shall attempt to fix by tightening all the screws once I get my hands on the correct screwdriver.

        Regarding poor battery contact, I would make sure the battery door hinge is sitting absolutely flush with the body and there is no debris in the locking ports. Sounds silly though I imagine any minute angle on the battery flap door can produce a poor contact – something which wouldn’t be helped by the two sprung battery pins located at the top of the mod.

        PS: Eagerly awaiting a firmware upgrade, wishing for a simple clock!

        • Hi Josef,

          The driver you’re looking for is a Torx T5. I’d recommend a high quality driver, such as a Wiha branded one.

          Firmware updates shouldn’t be too far off now! Thanks for your support!

  101. Hi I’m using the Proton Mod with the scion 2 tank and plexus coil 0.15ohm. Have tried also the coils that came with the kit also.

    I generally set the wattage to the lowest for the coil I use, as if I set too high and I cough.

    Was wandering if I should try a MTL tank, are any of the Innokin MTL tanks compatible with the proton

    I am using 70/30 mix with 1.5 to 3mg nicotine e-liquids with the scion 2 tank so could also the quality of the e-liquids be a problem in finding flavour hits I like

    • Hi Robert,

      The vapor production may be too much for you. I’d definitely try out a mouth to lung tank to see if you still cough, as the vapor production is much lower and more controllable.

      All of our MTL tanks are compatible with the Proton, provided you use an appropriate amount of wattage to power it. I’d take a look at the Zenith, which vapes very well at or below 20w, and is known for great flavor. Thanks!

  102. Hi, when will a software update become available for this device?
    It would be good if puff count would be shown on the screen by default as well as a stealth mode so the screen is not always active when being used?


    • Hi Paramvir,

      We are always looking for suggestions or feedback in regards to future improvements and products of ours. Feel free to email us at anytime to as well.

      Firmware updates will likely be included in our website overhaul, which should be coming quite soon.

      Thanks for your interest and support, cheers!

  103. Have been using this for about 2 months now. Probably the best vaping experience I’ve had yet. Your coils are just terrific, infinitely better than some brands that get a good deal more press and attention than yours. One problem though that I mention, at a minimum, for your future efforts… I find the battery door a real awkward design. Getting batteries in and closing the door without juice winding up rolling out or a battery falling back out can be difficult. Also, after my fairly brief usage of the product, am seeing the battery door come open on its own at times with the batteries falling to the floor. No longer getting a tight close on it. Would be a pain to have to dispose of this one prematurely over, of all things, a little battery door. Anyway, hope you reconsider that part of the design, and also would love to see you taking batteries in and out in a video — would like to see if you have an easier time with it than I do..

    • Hey Mitch,

      Thanks a lot for picking up a Proton and providing your feedback and kind words! The battery door is definitely going to be tackled in future releases. It’s the most common complaint about the device and we are looking for a proper resolution in future updates.

  104. I just bought one , the box is good , but the screen lacks brightness, almost invisible in a sunny day (Morocco, north Africa)

    • Hey Mustapha,

      Thanks for picking up a Proton and Scion II kit! Apologies for the lack of brightness, it can take a lot of drain out of the battery for high enough brightness to be perfectly visible in direct sunlight. I recommend shielding the screen to help visibility.

  105. Hi, when will a software update become available for this device?

  106. Bought a white one, received it last Tuesday. Today, Monday, noticed the back plate corner is broken. I haven’t dropped it, have barely used it. Sits on my shelf. Have no kids or anyone else that could mess with it, so I can only assume there was a fracture too small to see when I got it. I can’t recommend something so fragile.

    • Hi K D,

      This is covered under our 90 day limited warranty service. Please contact us as soon as you can via email at Our support team will assist you in getting a replacement device. Please have proof of purchase and pictures of the device ready. Thank you!

  107. I purchased my mod about a week and a half ago. And I can not get the battery door to completely close. I have went to the site to see if there was a fix. I’m very disappointed with this as this has become my favorite mod to date but this battery door is going to the end game of my use with it. Is there something I can do or use to fix this issue? I have 18650 batteries in the mod currently and have tried three other brands of batteries and get the same issue with all of them. I take the batteries out and it sits flush. No rattle or anything just the door issue. No drops at all. Not even knocked over so I have zero clue on what to do. About to buy another brand all together and be done.

    • Hi Kayla,

      Try flat top 18650 batteries to see if they fit better and allow the battery door to sit flush. Make sure the door is extended forward as far as possible before pushing it into the locked position. We offer a 90 day limited manufacturer warranty, so if all else fails, you may have a replacement Proton. Feel free to email us at to start a warranty claim, or contact the vendor you purchased it from for an exchange. Sorry for the hassle!

  108. Any news on a version 2? I REALLY like this device. It’s probably the best I’ve had in the 4 years since i switched to vaping. However, as you already know, the battery door… well it just plain sucks… If I don’t put the mod down just right, the door flaps open and the batteries roll everywhere.



    • Hey Matt,

      No news on a version 2 Proton! We’re always willing to take feedback and suggestions however. Feel free to email us at in regards to what you’d like to see on a version 2! Thanks for your support and happy vaping.

  109. Im in london and just had email from argos saying they are recalling the protons as issue with the batterys saying they can explode they supplyed samsung 18560 batterys are there other batterys i can use are the samsung ones ok i dont want to take the unit back for a battery issue as i like it can anybody help me has anyone else had an email about batterys overheating and exploding

    • Hi James,

      There is no official recall for the Proton, or issue with batteries as you mention. It sounds like a scam or false information email. Make sure your batteries are genuine from a trustworthy retailer, and you should be just fine. Our recommendations are Sony, Samsung, and LG batteries. Thanks James.

  110. Hi guys,

    What kind of e-juice do I use for the Innokin Proton + Scion 2 tank with Plex colis? Is it 70/30 VG/PG? I can’t seem to be able to find this info anywhere. Appreciate the help.

    • Hi Darko,

      The Scion 2 tank is best paired with higher VG juices for maximum vapor production. 70%VG/30%PG is a great starting point, and the tank can handle more VG if you so desire. Hope this helps!

  111. Hi Frank,
    Love the tank!! Only issue I’m having is the air flow slot is sticking, and is very difficult to open or close. I was wondering you could help me remedy this? Also, any eta on the new firmware release

    • Hi Stu!

      There might be an issue with the airflow control ring detent. Try not to force it at the end of the travel, whether opening or closing. If you have an ultrasonic cleaner, I’d recommend giving the airflow ring a bath, then rinsing it clean and letting it air dry.

      As far as firmware, I unfortunately do not have an update at this time. The new website has been delayed and I do not have an ETA regarding the release of firmware updates. Thanks for your support.

Leave a Reply to Innokin Frank Cancel reply

Your email address will not be published. Required fields are marked *

Show Buttons
Hide Buttons